In this article, we provide an overview of the most common cases of water leakage when using Rancilio Silvia . In the event of a leak, the first thing to do is to identify the position from where the liquid leaves the machine. Based on the location of the loss, the problem can be understood.

RANCILIO SILVIA LEAKS FROM THE FILTER HOLDER
If the Rancilio Silvia loses between the head of the device and the filter holder , the seal may be a problem. Usually:
- the seal is not correctly positioned between the head of the appliance and the filter holder. In this case, correct insertion is required
- The seal is worn and must be replaced
Generally, group head gaskets are consumed between 6 months and a year depending on the use of the machine. Premature wear of this seal can be caused by the use of excessive force when connecting the filter holder or when using the machine for a long period of time.

THE LOSSES OF THE RANCILIO SILVIA FROM ABOVE
A leak from the top (or head) of the Rancilio Silvia usually indicates a loose connection or a broken component inside the machine. In such cases, it is advisable to switch off the Rancilio Silvia and unplug it to open the upper part and check for the absence of hoses or broken pipes.
- In the case of loose tubes or pipes, it is necessary to reconnect them to the appropriate fitting using
- In case of damaged components, for example the boiler, it is necessary to replace it

LOSSES OF RANCILIO SILVIA FROM BELOW
- Check the water tank and drip tray to make sure there are no cracks or cuts where water can drain out. Make sure they are correctly positioned on the Top Coffee Maker Machine
- Make sure the return line is placed inside the water tank. If the hose is outside the tank or pushed up into the machine, it will cause a leak

THE LOSSES OF RANCILIO SILVIA FROM THE STEAM WAND
If the rod leaks from the lower end of the tube, it means that the steam valve is not completely closed. In this case, it is necessary to tighten the button. If the button seems to rotate, it may be broken. Try removing the button and manually turning the steam valve with an adjustable wrench or pliers.
If the leak persists, it is necessary to descale the Rancilio Silvia following the instructions in order to remove the scale inside the valve. After descaling the Rancilio Silvia , charge 4 to 6 water tanks to let it come out using the lance using the hot water function. This ensures that all debris or scale in the valve is completely removed.
If the leak persists, the steam valve must be replaced.

Comments
Post a Comment